HPOW10d_1000x1000_CC
IMG_5230_1000

HPOW10D

  • 800mW of High Power Directional Outdoor Wireless Access Point
  • Features multiple operating modes and Power over Ethernet
  • Setup Utility allows for easy configuration of multiple outdoor access points
  • Built-In 10dBi Directional Antennas
  • Heavy duty, weatherproof design

Add to Cart

Find Retailers


High Power Outdoor WiFi Access Point/Bridge/Repeater

Hawking Technology’s HPOW10D Long Range Directional Outdoor WiFi Access Point/Repeater puts multiple solutions into one weather proof outdoor unit. The High Power Long Range Directional Outdoor WiFi Access Point / Bridge functions as an Outdoor Access Point, Universal Repeater or Ethernet Bridge. Additionally, two 10dBi Directional antennas are built into the unit to provide a focused networking coverage. It features a PoE (Power over Ethernet) connection and includes wall and pole mounting kits for easy installation and setup.

Outdoor WISP (Outdoor Smart Repeater) Mode

Outdoor Wireless Internet Service Provider (WiFi Smart Repeater) mode lets you connect to any free hotspot/remote WiFi signal and rebroadcast the signal at your location with full firewalls and router capability. Enjoy a private network and security when accessing free hotspots.

Outdoor Wireless Access Point Mode:
Create wireless network in an outdoor or indoor location by setting the HPOW10 in Access Point mode. In Access Point mode, the HPOW10 Directional Outdoor Wireless Access Point enables wireless access to any existing wired networking

Outdoor Wireless-N Bridge Mode:
Enable any wired Ethernet-ready device or existing wired network to connect to your existing wired network using the HPOW10. Wirelessly connect the network of your remote office building to your main building easily by setting the HPOW10 in Bridge Mode.

Outdoor Wireless-N Universal Repeater Mode:
Repeat the wireless signal from your existing network and extend the total wireless range of your network to an outdoor location. Setting up the HPOW10 in Universal Repeater mode allows you to extend the range from an indoor or outdoor Wi-Fi network to your desired new location.

Easy Installation with Power Over Ethernet (PoE)
By combining your power and data connections into a single cable, PoE simplifies the setup of the High Power Outdoor WiFi Access Point/Bridge. The included Power over Ethernet DC Injector provides power and network access (through your home or business router or network connection) and combines them into a single RJ-45 connection for the HPOW10. This allows you to install the HPOW10 outdoors in hard to reach locations without worrying about running both power and Ethernet cables.

Mounting Options
The HPOW10 Long Range Directional Outdoor WiFi Access Point / Repeater is complete with both Pole and Mounting Hardware.
For Wall Mounting, locate the included bracket inside the packaging. Use the included hardware to mount the bracket to the wall. Once your bracket is secure, click the HPOW10 into place via the rear pole mount extension.

For Pole Mounting, use the included hardware and thread the mounting tie straps through the rear HPOW5 extension and around your pole. Thread the end through the lock head and secure at your preferred height.

Operating Modes:
  • Wireless-300N Access Point
  • Wireless-300N Ethernet Bridge
  • Wireless-300N Universal Repeater
  • Wireless-300N Point to Point Access Point
  • Wireless-300N Point to Multipoint Access Point
  • Wireless-300N WDS Repeater
  • Wireless-300N WISP Repeater
Network Specifications:
  • IEEE802.11 b/g/n
  • 10dBi Built-In MiMo Directional Antennas
  • 800mW Max 2.4GHz Wireless Transmission Power
  • Supports WEP, WPA, WPA2 Wi-Fi Security

 

Network Management:
  • Setup Utility (Browser Based)
  • Web Based Management Interface
Hardware Specifications:
  • Ports: Two 10/100 Mbps Ethernet Ports (PoE Pass Through)
  • Power: Power Over Ethernet Adapter (POE)
  • Dimension / Weight: 6.5 (H) X 3.75 (L) X 2 (W) inches / 0.77lbs.
  • Temperature: Operating: -4~140°F , Storage: -40~176°F
  • Humidity: Operating: 100% (Non-Condensing) Storage: 100% (Non-Condensing)
System Requirements:
 

  • Windows XP + or Mac OS X +
  • Internet web browser (Internet Explorer 4.0 or better, Safari, Mozilla, etc.)
  • Ethernet Cable to connect device to PoE (length will vary depending on installation environment)
  • A home or business network
How to figure out which version you have:

On the backside of the product there is a label that will determine which version you have. Click on the to see an image. To download a file, select the icon next to the select file.

Original

Serial Number:

(less)

USER'S MANUAL
DATASHEET
QUICK INSTALLATION GUIDES
DRIVERS & SOFTWARE
  • WINDOW OS
  • XP Not Available
  • Vista Not Available
  • 7 Not Available
  • 8 Not Available
  • 10 Not Available
  • MAC OS
  • 10.3 Not Available
  • 10.4 Not Available
  • 10.5 Not Available
  • 10.6 Not Available
  • 10.7 Not Available
  • 10.8 Not Available
  • 10.9 Not Available
  • 10.10 Not Available
  • 10.11 Not Available
  • 10.12 Not Available
  • 10.13 Not Available
  • 10.14 Not Available
VIDEO TITLE/LINK
UPLOADED
DESCRIPTION
5/21/2018 

A walkthrough on how to setup a long range outdoor WiFi building to building setup.

Please wait...

Subscribe to our newsletter

Subscribe to our newsletter