1-Port USB 2.0 Print Server for Multifunction Printers
[HMPS1U]
  • Easily Connects Your Multifunction All-In-One Printer to a Network
  • Share your USB Storage Devices: Thumb Drives, Hard Drives, etc...
  • High Speed 2.0 Connection for Most USB Devices
  • 4 LED Indicators: POWER, LINK, ACTIVE  and USB
  • No Need for a Dedicated Print Server Computer
  • Setup is Quick and Simple

HMPS1U Print Server for Multifunction Printers

1-Port USB 2.0 Print Server for Multifunction Printers 

The Hawking HMPS1U is a powerful and convenient tool to share your USB printer (standard or multi-function) with multiple computers. There is no need to have a dedicated computer to share a printer. The HMPS1U lets you to print and scan from any computer on your network, saving you the cost of having multiple printers or the trouble of manually sharing one printer with multiple computers. Print and save from any computer on your network with the HMPS1U.


Connect Wired to your Existing Network
The HMPS1U consolidates your USB printer and allows you to access them from any computers on your network.


How it Works
First, connect your HMPS1U to your Network using a wired connection. Then, connect your USB device to the HMPS1U and then install our software to connect to your USB device. Now, access your USB devices using any devices on your network (laptop or desktop)

 

 

hmps1u_1000.png
Enlarge Download
hmps1u_1000.png
hmps1u_180.png
hmps1urev1_1000.png
diagram1.png
Enlarge Download
diagram1.png

Network Specifications:

  •  IEEE 802.3 10Base-T
  •  IEEE 802.3u 100Base-TX

Printer Interface

  •  USB 2.0, 1.1 Compliant USB Type A Port

LAN Port

  • 10/100Mbps Auto-Negotiation UTP/STP RJ-45 Port

CPU/SDRAM/Flash ROM

  • R3210-G, 150MHz x86 RISC,(RDC)/ 8MByte 64Mbits SDRAM/2 MByte 16bits Flash

Printer Interface

  • USB 2.0, 1.1 Compliant USB Type A Port

Electrical Properties

  •  DC in: 12V/1A for Rev 1 /  5V/1A for Rev2
  •  Power Consumption: Max 2.5W
  •  Power Support for USB Port: 5V/1A

OS Support

  • Windows 2000/XP/2003/Vista

TCP/IP Protocol Supported

  • IPv4 TCP/IP

LED

  •  Power, Link, Active, USB

Temperature

  •  Operating: 0°~50°C (32°~122°F)
  •  Storage: -25°~55°C (-13°~131°F)

Dimensions/Weight

  •  80(L) * 60(W) * 25(H)mm/55g

Certification

  •  CE, FCC, RoHS Compliant

Warranty

  •  1 year
How to figure out which version you have:

On the backside of the product there is a label that will determine which version you have. Click on the to see an image. To download a file, select the icon next to the select file.
Original

Serial begins with HKCTMPS1U...

(more)
DOCUMENTATIONS
DOWNLOADS
VIDEOS
FAQs

DATASHEET

QUICK INSTALLATION GUIDES

USER'S MANUAL

DRIVERS & SOFTWARE

WINDOW OS

Not Available

10

Not Available

98SE

Not Available

2000

Not Available

ME

Not Available

XP

Not Available

Vista

Not Available

7

Not Available

8

MAC OS

Not Available

10.12

Not Available

10.11

Not Available

10.10

Not Available

10.3

Not Available

10.4

Not Available

10.5

Not Available

10.6

Not Available

10.7

Not Available

10.8

Not Available

10.9

SOFTWARE

 Version 2.33 - Use only if upgraded to FW 2.33

FIRMWARE

 Version 2.33 - Adds Win7 and 64 bit support

SOFTWARE

 Version 2.28 (Original CD Version)
VIDEO TITLE/LINK
UPLOADED
DESCRIPTION
  What is the default ip address to log into the Print Server and what is the username and password?
192.168.1.100 / 192.168.1.236, username: admin and password: admin
  How to check if my printer is compatible with the print server?
The HMPS1u should work with any printers as long as your computer's operating system supports that printer.
  How to check the compatibility between Print Server and operating system?
The HMPS1u only supports Windows operating systems.
  How to reset the device to factory default settings?
Hold the reset (INIT) button which on the side of the device for 30 seconds.
  What should I do if my printer is not listed under the print server in the control center?
Try updating the firmware for the Print Server from www.hawkingtech.com and also try uninstalling the old control center utility and reinstall control center from the website.
  How do I upgrade the firmware?
Download the firmware file from the Hawking website for the Print Server. Log into web interface page of the Print Server with its IP address, Go to configure -->maintenance and select the firmware file to upgrade the firmware.
  I can't uninstall the software. I run uninstall but nothing happens.
If this happens, run the original install program you used. It will ask you to repair or remove the software. Click remove and the software will automatically uninstall from your system.
  I want to share a USB drive with multiple computers at the same time but I do not want to use the control center. What do I do?
If you want to access a external USB drive at the same time from multiple computers, you can set up the HMPS1U in Server Mode. Login the the settings page, go to Config, look under General. Look for Storage Access Mode. Select the "Server Mode". Using it this way, it will show up as a regular drive on the network. Note: the drive must be formated in Fat/Fat32 format to use in server mode.
Revision 1

Rev. 1 printed on label

(more)
DOCUMENTATIONS
DOWNLOADS
VIDEOS
FAQs

QUICK INSTALLATION GUIDES

USER'S MANUAL

DRIVERS & SOFTWARE

WINDOW OS

Not Available

10

Not Available

98SE

Not Available

2000

Not Available

ME

Not Available

XP

Not Available

Vista

Not Available

7

Not Available

8

MAC OS

Not Available

10.12

Not Available

10.11

Not Available

10.10

Not Available

10.3

Not Available

10.4

Not Available

10.5

Not Available

10.6

Not Available

10.7

Not Available

10.8

Not Available

10.9

SOFTWARE

 Version 2.28 - Mac - Fixes OS 10.10 install

FIRMWARE

 Version 1.064 - Fixes USB Server Mode

SOFTWARE

 Version 2.49 - Windows 8 and 10 Support
VIDEO TITLE/LINK
UPLOADED
DESCRIPTION
  What is the default ip address to log into the Print Server and what is the username and password?
192.168.1.100 / 192.168.1.236, username: admin and password: admin
  How to check if my printer is compatible with the print server?
The HMPS1u should work with any printers as long as your computer's operating system supports that printer.
  How to check the compatibility between Print Server and operating system?
The HMPS1u only supports Windows operating systems.
  How to reset the device to factory default settings?
Hold the reset (INIT) button which on the side of the device for 30 seconds.
  What should I do if my printer is not listed under the print server in the control center?
Try updating the firmware for the Print Server from www.hawkingtech.com and also try uninstalling the old control center utility and reinstall control center from the website.
  How do I upgrade the firmware?
Download the firmware file from the Hawking website for the Print Server. Log into web interface page of the Print Server with its IP address, Go to configure -->maintenance and select the firmware file to upgrade the firmware.
  I can't uninstall the software. I run uninstall but nothing happens.
If this happens, run the original install program you used. It will ask you to repair or remove the software. Click remove and the software will automatically uninstall from your system.
  I want to share a USB drive with multiple computers at the same time but I do not want to use the control center. What do I do?
If you want to access a external USB drive at the same time from multiple computers, you can set up the HMPS1U in Server Mode. Login the the settings page, go to Config, look under General. Look for Storage Access Mode. Select the "Server Mode". Using it this way, it will show up as a regular drive on the network. Note: the drive must be formated in Fat/Fat32 format to use in server mode.
Revision 2
(more)
DOCUMENTATIONS
DOWNLOADS
VIDEOS
FAQs
DRIVERS & SOFTWARE

WINDOW OS

Not Available

10

Not Available

98SE

Not Available

2000

Not Available

ME

Not Available

XP

Not Available

Vista

Not Available

7

Not Available

8

MAC OS

Not Available

10.12

Not Available

10.11

Not Available

10.10

Not Available

10.3

Not Available

10.4

Not Available

10.5

Not Available

10.6

Not Available

10.7

Not Available

10.8

Not Available

10.9

VIDEO TITLE/LINK
UPLOADED
DESCRIPTION
  What is the default ip address to log into the Print Server and what is the username and password?
192.168.1.100 / 192.168.1.236, username: admin and password: admin
  How to check if my printer is compatible with the print server?
The HMPS1u should work with any printers as long as your computer's operating system supports that printer.
  How to check the compatibility between Print Server and operating system?
The HMPS1u only supports Windows operating systems.
  How to reset the device to factory default settings?
Hold the reset (INIT) button which on the side of the device for 30 seconds.
  What should I do if my printer is not listed under the print server in the control center?
Try updating the firmware for the Print Server from www.hawkingtech.com and also try uninstalling the old control center utility and reinstall control center from the website.
  How do I upgrade the firmware?
Download the firmware file from the Hawking website for the Print Server. Log into web interface page of the Print Server with its IP address, Go to configure -->maintenance and select the firmware file to upgrade the firmware.
  I can't uninstall the software. I run uninstall but nothing happens.
If this happens, run the original install program you used. It will ask you to repair or remove the software. Click remove and the software will automatically uninstall from your system.
  I want to share a USB drive with multiple computers at the same time but I do not want to use the control center. What do I do?
If you want to access a external USB drive at the same time from multiple computers, you can set up the HMPS1U in Server Mode. Login the the settings page, go to Config, look under General. Look for Storage Access Mode. Select the "Server Mode". Using it this way, it will show up as a regular drive on the network. Note: the drive must be formated in Fat/Fat32 format to use in server mode.
Revision 4
(more)
DOCUMENTATIONS
DOWNLOADS
VIDEOS
FAQs
DRIVERS & SOFTWARE

WINDOW OS

Not Available

10

Not Available

98SE

Not Available

2000

Not Available

ME

Not Available

XP

Not Available

Vista

Not Available

7

Not Available

8

MAC OS

Not Available

10.12

Not Available

10.11

Not Available

10.10

Not Available

10.3

Not Available

10.4

Not Available

10.5

Not Available

10.6

Not Available

10.7

Not Available

10.8

Not Available

10.9

VIDEO TITLE/LINK
UPLOADED
DESCRIPTION
  What is the default ip address to log into the Print Server and what is the username and password?
192.168.1.100 / 192.168.1.236, username: admin and password: admin
  How to check if my printer is compatible with the print server?
The HMPS1u should work with any printers as long as your computer's operating system supports that printer.
  How to check the compatibility between Print Server and operating system?
The HMPS1u only supports Windows operating systems.
  How to reset the device to factory default settings?
Hold the reset (INIT) button which on the side of the device for 30 seconds.
  What should I do if my printer is not listed under the print server in the control center?
Try updating the firmware for the Print Server from www.hawkingtech.com and also try uninstalling the old control center utility and reinstall control center from the website.
  How do I upgrade the firmware?
Download the firmware file from the Hawking website for the Print Server. Log into web interface page of the Print Server with its IP address, Go to configure -->maintenance and select the firmware file to upgrade the firmware.
  I can't uninstall the software. I run uninstall but nothing happens.
If this happens, run the original install program you used. It will ask you to repair or remove the software. Click remove and the software will automatically uninstall from your system.
  I want to share a USB drive with multiple computers at the same time but I do not want to use the control center. What do I do?
If you want to access a external USB drive at the same time from multiple computers, you can set up the HMPS1U in Server Mode. Login the the settings page, go to Config, look under General. Look for Storage Access Mode. Select the "Server Mode". Using it this way, it will show up as a regular drive on the network. Note: the drive must be formated in Fat/Fat32 format to use in server mode.

Powered by Tienda